PVC automatic door gasket welding machine, 60 sets of national best new benefits,pneumatic components, Chint, Schneider low voltage electrical / h, OMRON PLC .
Operating instructions:
Note:
native machine Not Installed mould strictly prohibit to trial run!!
1.This machine adopts three-phrase five-wire system to supply the power, that is 380V power and null line and PE line. before you use it,To Check The Power wire and PE wire were reliable fixed, cannotbobble.
2.Opening the electrical box check up, the five fusible cutout fuses has been connected, will air circuit breaker switch on inside the electrical box. Close the electrical box, will the main power switch hand shank turn on.
FU5 Transformer output switch 9V | FU4 Transformer output switch 24V | FU3 Transformer output switch 220V | FU2 Transformer input switch L2 | FU1 Transformer input switch L1 | QF2 draught fan switch | QF1 Heater switch |
3.Moving the lateral module body and longitude module body,When the lateral air cylinder and longitude air cylinder passes tip and tail end, checked to ensure the magnetic switch lamp with light on, and install reliable fixed.
4.
Moving the heater to up and down, When the heater air cylinder passes tip and tail end, checked to ensure the magnetic switch lamp with light on, and install reliable fixed; Moving
the heater,make the heater to in-between position, checked to ensure the heater air cylinder magnetic switch lamp with light on, and install reliable fixed.
5.On the door of the oven in electrical have three button, Respectively is heater
switch, Lighting switch and fan Switch. Open the heater switch and Lighting switch, checked to ensure the Heating indicator light lighting indicator, Whether ligh;Open the fan Switch, Check the fan to is correct; Welding time adjustable to 11 seconds,Time moves to a thimble 5 seconds,The heating time moves to 5 seconds;
notice:Thick or thin article door,The heater temperature of high and low,Heater and welding gap between die size,And heating time have close relationship,Need to make some adjustment.
6.Check the abrupt stop button is reset.
7.Pneumatic system pressure is 0.5-0.6 MPA.
Main Technical specifications:
number | item | norm | aunit |
1 | Total weight | 513 | Kg |
2 | Power for operation | 2.1 | KW |
3 | Power norm | AC380V/3HP/50HZ | |
4 | barometric pressure | 0.5-0.6 | MPa |
5 | work efficiency | >60 | pane/1 hour |
6 | weld cycle | 11~15 | (sec) |
7 | operating staff | 1 | (body) |
8 | overall dimension | 1820*1820*1130 | mm |
warn:
1)The electrical box placed not allowed any sundry,And should be kept clean.
2)To avoid electrical shock hazards, Please don't turn on the power of the state to open the door of the oven and touch the electrical electrical parts.
