Automatic wear magnetic stripe line instructions
Production equipment
1.To wear magnetic stripe automatically
2.Development of the machine
3.Working the case of Taiwan
Production process
45 ° PVC strips——The magnetic stripe import PVC strips front end——Wear cylinder stroke switch under pressure——Rapid penetration of PVC strip magnetic stripe magnetic stripe cavity
Instructions
1. 45 ° angle to the cutting line of the PVC strips on the working text table, Hand wear strip magnetic stripe cavity into the machine front end protruding magnetic stripe, Hand to promote forward slightly while travel switch signals, Wear cylinder under pressure at the same time, Documented motor action,Rapid penetration of 45 ° cutting angle of the magnetic stripe of a certain length PVC strips of magnetic stripe cavity, Thus the end of one cycle of operation.Sub-cycle.
2. Connect the pressure of the trip switch rod strip show no lift motor in low-speed operation,When the the Exhibition strips the magnetic stripe tension rod lift motor fast running.
3. Pressure
Gas source filter valve at a total pressure of 0.4MPa
Pressure to wear high-pressure cylinder valve shall not exceed 0.15MPa
Touch screen instructions
1. Chinese language interface of the touch screen.
2. Set length (head length) can be set according to the desired length.
Fully automatic wear magnetic stripe line section
